Enerco HS35FA User Manual

Browse online or download User Manual for Radiators Enerco HS35FA. Enerco HS35FA User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
04/04 Revision L1 #70036ENERCO GROUP, Inc., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 216-881-5500
If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or loss of life.
WARNING:
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appli-
ance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light appliance.
Extinguish any open flame.
Shut off gas to appliance.
Service must be performed by a qualified service agency.
This is an unvented gas-fired portable heater. It uses air (oxygen) from the area in which it is used.
Adequate combustion and ventilation air must be provided. Refer to page 3.
READ INSTRUCTIONS CAREFULLY: Read and
follow all instructions. Place instructions in a
safe place for future reference. Do not allow
anyone who has not read these instructions to
assemble, light, adjust or operate the heater.
MH35FA
MODEL
MODEL
OPERATING INSTRUCTIONS AND OWNER’S MANUAL
MR. HEATER
HEATSTAR
HS35FA
FORCED AIR PROPANE
CONSTRUCTION HEATER
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - HEATSTAR

04/04 Revision L1 #70036ENERCO GROUP, Inc., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 216-881-5500If the information in this manual is not followed e

Page 2

SPECIFICATIONSType of Gas: ... For use with Propane OnlyGas Supply Pressureto regulator ... Max:

Page 3 - SAFETY PRECAUTIONS

OPERATING PRECAUTIONSThis is a propane, direct-fired, forced air heater. It's intended use isprimarily temporary heating of buildings under const

Page 4

ODOR FADE WARNINGWARNINGAsphyxiation Hazard• Do not use this heater for heating human livingquarters.• Do not use in unventilated areas.• The flow of

Page 5 - SERVICING

OPERATING INSTRUCTIONSPREPARING FOR OPERATION1. Check the heater for possible shipping damage. If any is found,immediately notify the factory.2. Follo

Page 6

REF.# ITEM# DESCRIPTION QTY.13 8077 Fan Blade, 6.75 x .75 Pitch 114 2113 Power Cord Assembly 115 8136 Bushing Strain Relief 116 8116 Nut Hex 5-28 TE V

Page 7 - BTU'S PER HOUR REQUIRED

SIZE AND CAPACITY OF PROPANECYLINDERS REQUIREDThe charts below show the approximate size of the cylinderrequired for these heaters. To use the chart:

Page 8

WARNING:USE ONLY MANUFACTURER’S REPLACEMENT PARTS. USE OF ANY OTHER PARTSCOULD CAUSE INJURY OR DEATH. REPLACEMENT PARTS ARE ONLY AVAILABLEDIRECT FROM

Comments to this Manuals

No comments